Novastar CVT310/CVT320 Fiber Converter
Novastar CVT310 fiber converter is the converter between ethernet cable and multi-mode optic fiber cable for Novastar M3 led system.
1. Novastar CVT310/CVT320 Fiber Converter Introduction:
1). If you have a large distance between your NovaStar controller and your LED display, the CVT310 fiber optic converter is the right solution.
2). Novastar CVT310 can be used either as a transmitter or receiver unit. Thanks to the LC interface, the device can be connected very easily to a fiber optic source.
3). To transmit the signal from a controller to an LED Display two units are always needed (Transmitter (TX) and Receiver (RX)).
2. Novastar CVT310/CVT320 Fiber Converter Features:
1). 1 cable interface, 1 fiber interface;
2). 100~240V AC 50/60HZ power supply;
3). Use multi-mode dual-core optical fiber with LC interface, the transmission distance is 300M;
4). No driver required, immediately use after connection.
3. Novastar CVT310/CVT320 Fiber Converter Specifications:
Note: Novastar CVT310/CVT320 is Nova EO converter device; two units are always required!!
1). 1 optic fiber interface
2). 1x RJ45 Ethernet port for data input
3). Power supply: 100~240V AC 50/60Hz
4). DC output: 5V, 5A
5). No need to install the drivers
6). Operating temperature: -20°C ~ 70°C
7). Operating humidity: 10 ~ 90%
8). CVT310: Transmission distance up to 300m, by using multi-mode dual-core optic fiber with LC interface
9). CVT320: Transmission distance up to 15km, by using signle-mode dual-core optic fiber with LC interface
10). Certification: CE, RoHS, FCC, EAC.
Novastar CVT10(S/M) Fiber Converter
1. Novastar CVT10 Fiber Converter Introduction:
1). Novastar CVT10 fiber converter offers a cost-effective way to convert optical signals to electrical signals, or electrical signals to optical signals, for connecting the sending card to the led display.
2). Delivering a full-duplex, efficient and stable data transmission that is not easily interfered with, this converter is ideal for long-distance transmission.
3.) The CVT10 hardware design focuses on the practicality and convenience of the on-site installation.
4). It can be mounted horizontally, in a suspended way, or rack mounted, which is easy, secure and reliable.
5). For rack mounting, two CVT10 devices, or one CVT10 device and a connecting piece can be combined into one assembly that is 1U in width.
2. CVT10 Fiber Converter Features:
1). Models include the CVT10-S (single-mode) and the CVT10-M (multi-mode).
2). Have 2x optical ports with hot-swappable optical modules installed at the factory, bandwidth of each up to 10 Gbit/s
3). Have 10x Gigabit Ethernet ports, bandwidth of each up to 1 Gbit/s
a. Fiber in and Ethernet out: 8x Ethernet ports available (ports 1–8), ports 9–10 currently unavailable (to beavailable in the future upgrade)
b. Ethernet in and fiber out: 10x Ethernet ports available
4). Have 2 types of power connectors, including a 3-pin power socket and a PowerCON socket
5). Have 1x type-B USB control port
3. CVT10 Fiber Converter Specifications:
| Electrical Specifications | Power supply | 100-240V~, 50/60Hz, 0.7A |
| Rated power consumption | 22 W | |
| Operating Environment | Temperature | –20ºC to +60ºC |
| Humidity | 10% RH to 80% RH, non-condensing | |
| Storage Environment | Temperature | –20°C to +70°C |
| Humidity | 10% RH to 95% RH, non-condensing | |
| Physical Specifications | Dimensions | 254.3 mm × 50.1 mm × 290.0 mm |
| Net weight | 2.1 kg Note: It is the weight of a single product only. | |
| Gross weight | 3.1 kg Note: It is the total weight of the product, accessories, printed materials and packing materials packed according to the packing specifications. | |
| Packing Information | Packing box | 362.0 mm × 141.0 mm × 331.0 mm, kraft paper box |
| Outer box | 387.0 mm × 173.0 mm × 359.0 mm, kraft paper box | |
| Packing list | l 1x CVT10 l 1x Power cord, 1x USB cable, 1x Ethernet cable l 1x Supporting bracket A (with nuts), 1x Supporting bracket B (without nuts) l 1x Connecting piece l 12x M3*8 screws l 1x Assembling diagram l 1x Certificate of Approval | |
| Certifications | RoHS, FCC, CE, IC | |
4. Novastar CVT10 Fiber Converter Applications:
The Novastar CVT10 fiber converter is used for long-distance data transmission.
Users can decide a connection method based on whether the sending card has optical ports.
5. Resources Download: CVT10 Fiber Converter Specifications
Novastar CVT10 Pro(S/M) Fiber Converter
1. More Reliable, More Powerful
The all new CVT10 Pro meets the needs of various long-distance transmission scenarios and works with all other NovaStar processors.
2. Neutrik Interface, Reliable Connection
CVT10-Pro supports 10x Gigabit Ethernet ports and 1x type-B USB control port, 2 types of power connectors and PowerCON socket.
3. Two Interface Available
2x pre-installed hot-swappable optical modules, bandwidth of each up to 10 Gbit/s to secure the transmission.
4. A IP65 Waterproof, Dust Proof and Durable Design
Precise IP65 water and dust proof design,adept in working at harsh outdoor environment.
5. Upgraded Safety with Flexible Hanging
Especially flexible and reliable design for rental activities, can be installed to both claw light hook and standard cabinet.
6. Notes:
1). Supports 10x Gigabit Ethernet ports while working with MX40 Pro, 8x Gigabit Ethernet ports while working with other controllers.
2). Fully waterproof and dust proof level in line with IP65 while power, USB, network port protective cover closed and fiber optic port connected.
Novastar CVT4K(S/M) Fiber Converter
1). Supports 16-channel Neutrik Ethernet outputs.
2). Supports 4-channel optical fiber interfaces. Two of them are master input / output channels and the other two are backups.
3). Supports two types of power interfaces (3-pin power socket and powerCON) with dual-power redundancy backup.
4). With various indicator lights on the front panel, each status can be showd clearly.
5). AC 100~240V ~50/60Hz
6). No need to install the drivers.
7). Certification: EMC, LVD, RoHS, FCC, UL/CUL, CB, EAC, IC.
Novastar Fiber Converter Comparison
评价
目前还没有评价